钳行者系 · 主体Plier Voyager family · Hub
钳行者Plier
Voyager
一只乒乓球拍握把大小的小黑盒，把一把凯尼派克小钳、批头、小刀和小工具收在一起。扩展片一片 3.6 毫米，吸上就走。 A slim black case the size of a ping-pong paddle grip. It carries a Knipex mini plier, bits, a blade and small tools. Each expansion plate is 3.6 mm thick and snaps on with magnets.
- 模数Module
- 4 mm
- 扩展片厚Plate
- 3.6 mm
- 外轮廓Outline
- 同 ARCARC-size
- 磁铁Magnets
- 全系一种One spec
体系The system
一片 4 毫米，一种磁铁One 4 mm module. One magnet.
市面上的收纳盒太大，配件散，钳子也没有发力的地方。钳行者用建筑的办法来处理：先定模数，再做构件，最后处理节点。所有扩展片按 4 毫米模数设计，全系用同一种磁铁，需要什么就吸上什么。 Most cases are bulky, accessories scatter, and a mini plier has nowhere to push against. Plier Voyager is designed like a building: a module first, then components, then the joints. Every plate follows a 4 mm module and uses the same magnet, so you add only what you need.
- 4.0磁铁厚 4 毫米，是全系统的模数。三片叠起来就是 12 毫米的厚块。The 4 mm magnet sets the module. Three plates make a 12 mm block.
- 3.6扩展片实际只有 3.6 毫米，磁铁两面各凸出 0.2 毫米。Plates are 3.6 mm; magnets stand 0.2 mm proud on each face.
- 0.2片与片只靠磁铁接触，滑开顺手，也不磨打印表面的纹理。Plates touch only at the magnets, so they slide cleanly and never scuff the printed texture.
磁吸叠合Magnetic stacking
一片一片，吸上就走Plate by plate, snap and go
往下滚动：主壳和三片扩展片从分解状态逐片吸合。每片 4 毫米一个模数，磁铁对正，片与片只靠磁铁接触。Scroll: the hub and three plates come together one by one. Each plate is one 4 mm module; magnets align, and plates touch only at the magnets.
- HUB主壳 · 钳子Hub · plier
- P-01扁批头板Bit plate
- P-02洛森小工具板Roxon plate
- P-03存储板Storage plate
12.0mm · 三片 × 4 mm3 plates × 4 mm
构件Components
主壳加扩展片A hub and its plates
主壳包住钳子，扩展片磁吸在主壳上，可以叠放。外轮廓与莱泽曼 ARC 一致，能共享磁吸位置。The hub holds the plier; plates stack on it magnetically. The outline matches the Leatherman ARC and shares its magnet positions.
- HUB主壳（无棘轮 / 棘轮）Hub (plain / ratchet)包住钳子，带背夹；钳体孔位加延长杆，可当直柄螺丝刀或 T 型把手。Holds the plier, with a clip. Use the extension as a straight driver or a T-handle.必选
- P-01扁批头板Flat bit plate兼容 4 毫米短批、长批和 6.35 毫米六角批。Takes 4 mm short and long bits and 1/4" hex bits.3.6
- P-02洛森小工具板Roxon tool plate装洛森 FTS1 系列小工具三件。Holds three Roxon FTS1 mini tools.3.6
- P-03存储板Storage plate放 SIM 卡、TF 卡、SD 卡。SIM, microSD and SD cards.3.6
- P-04笔槽板 · 个护板Pen plate · Care plate3.6
- C-01军刀卡 · 梳子卡 · 电池卡Swiss-tool, comb and battery cards3.6
视频Video
先看它怎么用See it in use
中文版视频在 B 站，点开在新窗口播放。English videos will be on YouTube. Until then, the links open the Chinese originals on Bilibili.
▶ BILIBILI
钳行者 基座更新～银色钳子来了！2026.07.08
▶ BILIBILI
钳行者全套模块重磅更新！批头收纳 / 多功能理容 / 磁吸存储卡盒全讲解2026.06.24
▶ BILIBILI
钳行者配件更新：个护板 1 - 瑞士军刀卡2026.06.08
▶ BILIBILI
钳行者 配件更新2 个护板：男人也可以讲究讲究2026.06.07
▶ BILIBILI
钳行者配件 更新 1 充电宝2026.06.03
▶ BILIBILI
DeepDIY原创新作 - 钳行者 Plier Voyager2026.05.12
共 6 条，按时间倒序；更多视频见 B 站 @DeepDIY。6 videos on Bilibili (in Chinese), newest first. More on our Bilibili channel.
配置与购买清单Configure & shopping list
选好配置，照单购买Pick a setup, then shop the list
行器只做盒子和扩展片。钳子、批头、洛森小工具这些是别家的产品，按清单自己买最划算。右边的清单会随你的选择更新，每一项都附链接。 We make the case and the plates. The plier, bits and tools are made by other brands, so you buy them directly. The list on the right updates as you choose, with a link for each item.
材料Material
碳纤维 3D 打印Printed in carbon-fibre composites
每一件都在自己的工作室里打印、检查、发货。表面是等高线一样的水波纹，弱化打印层纹，防指纹，也防滑。Every part is printed, checked and shipped from our studio. A contour-ripple surface hides layer lines, resists fingerprints and adds grip.
深灰磨砂，手感细腻，打印最稳定。
Matte dark grey, fine to the touch, our most consistent print.
更有韧性，耐冲击，适合天天挂在身上。
Tougher and impact-resistant for daily carry.
工程级尼龙，强度和耐热最好。
Engineering nylon with the best strength and heat resistance.
相关系列Related
和它一起带Carry it with
想把钳子挂在腰上，看钳途腰包；已经有莱泽曼 ARC，看 ARC 系列；卡片一族见批行客和行者匣。To wear the plier on your belt, see Pouch Trek. Already own a Leatherman ARC? See the ARC Series. For the card family, see Bit Walker and CardCase.